During the use of the chamber filter press, if the pressure is insufficient, the quality and efficiency of the filter press will be reduced. However, excessive pressure is also extremely unfavorable for the use of the chamber filter press. Only reasonable pressure control can ensure the use of the filter press. safe and efficient.

1. If the pressure of the chamber filter press is too high, it is usually caused by the abnormality of the hydraulic system, which will cause the hydraulic system of the chamber filter press to overheat, resulting in the deterioration of the hydraulic oil. The chamber filter press is composed of a flat filter plate and a hollow filter frame. The filter cloth is fixed on the box, which is the main form of the early filter press. The filter chamber of chamber filter press is composed of two adjacent depressions. The main advantage is that it is convenient to replace the filter cloth, but the disadvantage is that the efficiency is low, the filtering effect is not good, and the filter plate is easily damaged.

2. When the pressure of the chamber filter press exceeds the pressure that the filter plate can withstand, it will cause the filter plate to burst, which is very dangerous. The chamber filter press is composed of a flat filter plate and a hollow filter frame. The filter cloth is fixed on the box, which is the main form of the early filter press. The filter chamber of chamber filter press is composed of two adjacent depressions. The main advantage is that it is convenient to replace the filter cloth, but the disadvantage is that the efficiency is low, the filtering effect is not good, and the filter plate is easily damaged.

3. If the pressure of the chamber filter press is too high, it will also cause the motor to overheat, and the overheating of the motor will be more likely to cause danger.

It can be seen that the harm caused by the high working pressure of the chamber filter press is still very large. Only by controlling it within an appropriate range can the filter press operate more safely, thereby reducing the occurrence of failure problems and prolonging the chamber filter press. life of the press. The difference between the automatic filter press and the ordinary filter press is that there are more systems such as automatic pulling plate system, automatic liquid-contacting plate turning, automatic filter cloth cleaning, and other systems. Make equipment operation more intelligent and automatic. The structure design of the whole machine is scientific and reasonable, the mechanical strength is high, and the structure is stable, durable, and easy to operate and maintain.

The surface of the filter plate of the sand washing filter press has pits and bosses to support the filter cloth. There are through holes in the center and corners of the filter plate, which form a complete channel after assembly, which can pass in the suspension, wash water and lead out the filtrate. There are handles on both sides of the filter plate, which are supported on the beam, and the filter plate is pressed by the pressing device. The filter cloth between the filter plates acts as a seal.

The above is the harm caused by the excessive pressure of the chamber filter press summarized by the editor. I hope these contents can help friends in need. As a supplier of chamber filter press, Kintep produces products with stable performance. If you want to know more about chamber filter press, then come and pay attention to our website.